Hero Cleaners
Cleaning advice from the professionals.

Ink stains can be a devil to clean. If you do not know what you are doing, you can easily make a dime sized spot a plate sized spot. If you are facing an ink spot from a ball point pen or even a sharpie marker, here is what you need to do.

  1. Do not panic. The last thing that you want to do is run to the sink and grab anything that you can to apply to the spot. Take a breath, calm down and move on to the next step.
  2. Get a professional strength cleaner. You need a pro spotter specialized to remove ink. A general spot cleaner will just make a mess of things. This might mean that you have to place a towel over the spot and wait to clean it until your ink remover arrives. Purchase a product like InkBGone.

    Check Prices on Amazon.
  3. When your product arrives, get a clean white cotton towel and apply the spotter to the towel.
  4. Dab the spot, working from the outside towards the inside.
  5. Go slow and be patient. If it is a large spot, you might be at it for some time. Avoid the temptation to rub the spot. Only dab it and do not use too much cleaner at once.
  6. Once no more ink transfers, you are done. Let the spot dry before putting it back to work.

This method will work for most colors of ink including blue and black and many sharpies.

Front loading washers are great machines. They clean clothes very well, use minimal water and let’s face it, they look cool. They are not machines without maintenance however. They require regular cleaning. Regular cleaning will keep them working well, looking good and most importantly, smelling good. Without a regular cleaning these machines can start to put out quite an odor. Here is how you can clean your front load washer easily.

Washer Cleaning Steps

  1. Purchase a bottle of washing machine cleaner. Glisten Washer Magic is a good choice.
    Check Prices on Amazon
  2. Apply your washing machine cleaner to a rag and wipe the inner seal of the washing machine to remove any residue.
  3. Add the specified amount of solution to the detergent container of your washer. In the case of Washer Magic, add 1/2 cup.
  4. Run your washing machine on its normal wash cycle using hot water.
  5. Repeat this process once a month or whenever an odor develops.

Tips

  • If your washer is heavily soiled meaning that you have not cleaned it in some time, repeat applications may be needed.
  • If you have a persistent smell, check the seal. Gunk tends to get caught here.
  • To minimize mildew odor, leave your front loading washer door open between uses.
  • Remove clothes quickly from your washing machine to prevent moldy odors.
  • Clean your drain pump filter regularly. Did you know you had one? It is typically located on one of the lower front corners of the machine.

carpet cleaningIs it possible to find carpet cleaning for just $20? Some companies will tell you know but some boldly advertise this price. Who is right? Are the companies advertising such a low price just trying to rip you off? Well, the answer is, it depends. Honestly, some of the companies offering cleaning for $20 or less are trying to rip you off, others truly offer cleaning for that price. The trick is finding out which kind of company that you are dealing with. This article will give you some tips on companies to avoid and companies to hire.

We are assuming that you have set your budget at $20 a room and are only looking at companies in that price range to hire. I will begin by listing the companies that you should consider. Why not start out positive right?

Carpet cleaning companies you should consider hiring.

  • They state that everything needed for a basic cleaning is included in their price. This will essentially be just pre-spray, basic spot cleaning and extraction. At this price point, you should not be looking at receiving things like vacuuming, furniture moving, carpet protector, etc. A legitimate company is charging this low of a price because they have stripped the service to just the basics. This allows you to get a good clean by doing some of the prep work yourself.
  • They have a reasonable rooms size limit.
    This should be somewhere around 200 square feet per room. Any rooms larger than that may incur an additional charge or may be charged as two rooms. This size limit means that most rooms in your home will count as only one.
  • They have a guarantee.
    Just because you are looking for a low price cleaning does not mean that you should be throwing your money away. You should expect to be satisfied with the results.
  • They look professional.
    The company should have a professional website and image. Check out Reliant Carpet Cleaning for an example. This Dallas carpet cleaning company has low rates but still provides quality services.

Carpet cleaning companies you should avoid.

  • They do not include everything in the basic price.
    This is known as bait and switch. Some companies will come into your home and try to charge you extra for every little thing. If the fine print on their coupon says some conditions apply or something similar, avoid them. They should state what is included right away.
  • They have small room sizes.
    Most people have no idea how big their room size is and some companies take advantage of this by having low room size limits. You might think that 100 square feet is a lot and an appropriate limit but the only room that is less than that size in your house is probably your master closet. Room sizes should be 200 square feet or larger.
  • They do not mention a guarantee.
    All companies should have a guarantee, no matter the price point.

Finding a discount carpet cleaner is never an easy thing because many of the companies offering low prices are only trying to cheat you. So, look at the things above and then research the company thoroughly online before you even think of scheduling your carpet cleaning service.

dog-urineIf your dog or cat has left their scent all over your home, it can change the way you use it. It makes you self conscious about how your home presents itself and makes you not want to invite friends and family over. There are some things that you can do to temporarily hide the odor and allow you to entertain. Here are our five top tips.

  1. Spray the spot with vinegar and water.
    If you know where the offending odor is, mix up a solution of one part white distilled vinegar and two parts water. Mist it on the spot. Vinegar is a natural disinfectant and will help neutralize the odor.
  2. Use a cinnamon plug in, candle or oil burner.
    Cinnamon seems to mask the odor the best. The scents like apple or cherry only blend in with the odor producing a scent like apple/urine or cherry/pee pee.
  3. Cut the humidity.
    The salts in urine attract humidity. This is why pet stains smell worse on a humid and rainy day. Use your HVAC system and a dehumidifier, if you have one, to cut the humidity in your home and minimize the odor.
  4. Introduce Fresh Air
    If it is a nice day or night, open every window you can in your home. Focus on windows on opposite ends of the home to create a cross breeze.
  5. Thoroughly Inspect Your Home For Odor
    Look around and make sure that you do not have any easy odor causing materials to remove. Look for pet stains on towels on the floor, pet bedding, cushions, corners of furniture, etc. Remove any odor causing materials that you can before your guests arrive.

Squish! There is nothing worse than walking into your home, stepping on your carpet and hearing that sound. It means that flood water clean upsomething has gone terribly wrong with your plumbing. It could be an over flowing toilet, a busted pipe or even a slab leak. It could even be something as simple as a backed up air conditioner drain (you would be surprised how much water they can put out). Whatever the case, you have a mess on your hands and you need to get it cleaned up. Here is what you need to do.

1. Control The Leak

This is job one right now, to minimize the damage caused by the flood. If it has been caused by a broken pipe or over flowing toilet, you need to shut off the water. If the malfunctioning pipe has its own cutoff, you can cut off the water at the source of the leak and keep the rest of the water in your home flowing. If there is no cutoff or if the shutoff valve on the pipe or appliance is not functioning (very common), you will need to shut off the main water supply to the home. This will be located on the outside perimeter of your home in an underground box or at the water meter.

2. Contact A Flood Clean Up Company

The sooner that you get someone to your home, the better. This is because the longer that water sits on your carpet, wood floors, etc, the more damage it will do. Do a quick search for “flood clean up [your town]” or “water clean up [your town] and you should come up with many options. Make sure that the company that you hire is certified in water damage restoration by the IICRC or a similar organization. If you are not sure who to call, you should contact you insurance company for a referral.

3. Contact Your Insurance Company

Once you have a flood clean up crew on the way, you should get the ball rolling with your insurance company. Most will send an adjuster to your home fairly quickly. They do this in an effort to save themselves money by making sure that everything is being handled properly.

4. Have The Source Of The Leak Repaired

Your last step is to have the source of the leak repaired. In most cases, you will be calling a plumber to repair a faulty pipe, water heater, etc. You could be dealing with other contractors as well though if the leak was from an air conditioner or other appliance.

iron-cleanHas your home’s iron seen better days. Is the sole plate covered in dirt and the water reservoir filled with rust. Before you throw it out, you should consider cleaning it. You might just be able to restore your iron to a like new condition. With irons these days costing up to $100 or more, this can save you a great deal of money.

To get started, you will need just a few things. You will need baking soda, vinegar, distilled water and a rag.

First, lets tackle the sole plate. Make a mixture of baking soda and water using equal parts of both. Now take a rag and use the mixture to clean off the sole plate, scrubbing away dirt and impurities. When you are finished, remove any residue from the sole plate with a clean towel soaked in water.

Next, it is time to clean out the water reservoir. Make a solution of distilled water and vinegar, using equal solutions of each. Fill the reservoir with the solution and turn the iron on to the lowest steam setting. Iron an old towel with the iron on the steam solution for around five minutes and then empty the reservoir.

You should now have an ion that is in much better condition and that is ready to give you a few more years of service. If the above steps fail to restore your iron, chances are it has seen its last pair of dress slacks and it should be replaced.

olefin rugOlefin or polypropylene is a material that is commonly used in area rugs. It is a material that has a lot of advantages and some disadvantages as well.

Olefin Advantages: There are many good characteristics of olefin. For starters, it is a rather cheap material. This allows for consumers to purchase some rather inexpensive, yet quality rugs. It is also very resistant to soiling. This is because olefin absorbs little moisture. Finally, it is a rather soft material, when compared to nylon, etc. This makes it a comfortable material to use in a rug.

Olefin Disadvantages: The main disadvantage to this material is that because it is soft, it wears quickly. For this reason, you should not use an olefin rug in a high wear area if you want it to last for any length of time. This means that it is a poor material for entryways and hallways. Another problem with olefin is that it attracts grease like a magnet. This also makes it a bad candidate for an entry rug.

Cleaning Olefin Rugs: Because they absorb little moisture, cleaning these types of rugs is very easy. They are very forgiving so the average home owner should have no issue cleaning them with a rental carpet cleaner or a home carpet cleaner. Just clean them like you would a standard wall to wall carpet The only potential problem to look out for is what is beneath the rug. Because this type of material does not absorb moisture, water will tend to run down the fiber to the backing of the carpet, potentially wetting the floor underneath. Because of this, you should avoid cleaning them on top of hardwood floors.

Berber PatchBerber carpet is the name associated with carpets with a loop construction. Traditional Berber has a more specific definition, but these days, if it has a continuous loop it is referred to as a Berber carpet. It can be made of just about any material but it is most commonly made of either olefin/polypropylene or nylon. Because of the tight loop construction, it does have some special cleaning requirements.

Because of the loop construction, this type of carpet can be tough to thoroughly clean. The construction causes a textured pattern which makes it tricky for the cleaner to reach all of the carpet fiber. This is true with all methods but it is particularly true with steam cleaning where the carpet wand may have trouble staying in contact with the surface of the carpet. To combat this problem, your carpet cleaner should take more time when cleaning this type of carpet so that they reach the entire surface. If using a steam cleaning method, your carpet cleaner should make an extra drying pass to remove additional moisture that may have been missed if the carpet wand lost contact with the surface.

Another problem that is common with Berber carpet is wicking. Wicking can occur when the carpet takes too long to dry and soil from below the carpet wicks back up to the surface. This is a problem with all Berbers but is particularly bad with olefin or polypropylene Berber carpets. This is because this type of material absorbs little moisture causing water to flow down the fiber to the backing of the carpet. To combat wicking problems, your carpet cleaner should get the carpet dry as fast as possible. This might involve the use of carpet fans, ceiling fans, the homes HVAC system or a combination of methods.

The last problem that I will discuss with Berber is the possibility of runs in the carpet. Because of the continuous loop, it is possible to pull a fiber and cause a run that goes across the entire surface of the carpet from one end to another. To combat this problem, loose ends should be snipped when possible and care should be taken hen vacuuming the carpet or when using rotary and crb (counter rotating brush) machines.

duster-featherYou might not think about it much, but at some point, you will need to clean your feather duster. At some point, they will get so full of dust and dirt that they become less effective at cleaning. No problem, they are quite easy to clean.

In most cases, to clean a feather duster all you will have to do is shake it out. Of course, you do not want to do this inside, so go outside and shake it. Do not beat it against a wall or anything hard because this could easily damage the feathers. as an alternative to shaking your feather duster, you could also use your homes vacuum cleaner if it has a good HEPA filter. Simply take the hose attachment and vacuum the feathers being sure to get to all of the ones in the middle as well.

If your duster has gotten soiled with liquid or something that will not simply shake out, you will need a more aggressive cleaning. Fill your sink with warm water and a tablespoon of a mild dish soap. Take your feather duster and submerge it into the mixture while moving it back and forth. After a minute or so, remove it and rinse it with warm water. Now wring the duster out with your hands and hang it up to air dry. Let it dry completely before putting it back to use. When it is dry, fluff the feathers a bit with your fingers and you are done.

carpet cleaningCarpet cleaning is not something that is done extremely often. Although we should have our carpet cleaned once a year, we often put it off and wait several years to have it cleaned. Because of this fact, you may be uncertain about what is included in a standard carpet cleaning. One common question is whether carpet cleaners move furniture. Well, do they?

The answer is yes and no. Some carpet cleaners move furniture and some do not. The ones who do move furniture will typically state it in their advertisements or will be quick to bring it up. If a carpet cleaner does not say that they move furniture, you can be sure that they do not or that there is an extra charge for it.

Even if a carpet cleaner does move furniture, they will typically not move all of the furniture. Moving all of the furniture in a home would be expensive and would be an unnecessary risk. Most carpet cleaners who do move furniture will move small items like chairs and end tables. Some will even move couches and similar furniture. Very few cleaners will move beds or dressers and just about no cleaner will move electronics.